4 Ways To Fix Trimble EZ-Steer Problems

trimble ez steer problems
trimble ez steer problems

There is no denying the importance of tractors in farming. They have been in use for decades and are a must-have for every farmer. From tillage to plowing, it performs various tasks seamlessly and makes farming a hassle-free experience for you.

With that out of the way, tractors have come a long way since their inception. Modern tractors come with robust features that take convenience a step further. Gone are the days when farming was a tedious task.

Features like quad transmission and assisted steering systems ensure convenience and efficiency for the best farming experience.

Talking about assisted steering systems, you cannot leave the Trimble Ez-steer system behind. It is manufactured by Trimble, a popular company known for manufacturing equipment for construction and agriculture. Headquartered in California, USA, the company came into being in 1978.

The Trimble Ez-steer system uses highly advanced technology to provide a simple hands-free farming experience. It works on over 1200 vehicles, more than any other assisted steering system. You can use this system on any vehicle with power steering, including trucks.

The Trimble Ez-steer system is highly accurate, making it easier for inexperienced farmers to operate. It comes with t2 terrain technology that avoids skips and overlaps even when working on rough fields.

How To Fix Trimble EZ-Steer Problems?

There are a few problems that you might come across while using the Trimble Ez-steer system. Without an iota of doubt, the Trimble Ez-steer system is an exceptional technology.

However, it is also vulnerable to many issues. Today, we will discuss some of the most common Trimble Ez-steer system problems and their solutions. Let’s get started!

  1. Connection Failure

Connection Failure

Connection failure is one of the most common problems you will likely face while using the Trimble Ez-steer system. Many users have complained that the system shows an error message that says “connection failure” and then stops working.

Of course, it is frustrating for a farmer as the system does not work at all. This can happen anytime, and when it does, it puts your entire farming experience down in flames.

Although there could be many reasons for this troubling message, the first thing to check is the wiring and plugs. If any of the wires or plugs have gone loose or disconnected, the chances are that the Trimble Ez-steer system will show this error message.

To fix this problem, firmly press all your connectors to ensure that they are tightly plugged in. If your device is still showing the message, then consider restarting it. If that does not fix the problem either, perhaps there is something wrong with the connection.

The signal strength of the Trimble Ez-steer system deteriorates as the distance increases between the device and the system. Moving closer to the system is likely to fix the problem.

In order to control the device from a further distance, you will have to purchase a range extender for your device, which will allow it to maintain stable connections even at a distance.

  1. Steering Problems

Steering Problems

Steering problems are also quite common with the Trimble Ez-steer system. Sometimes, you may see an error message that tells you to adjust the sensitivity of the Trimble Ez-steer system.

It usually happens when the technology in this system feels that you are turning the wheel manually, and the system shuts down the auto-steer system.

If the steering wheel has worn out, you will likely face this issue. The grip may get smooth when the wheel wears out, making the motor slip off.

If you have been facing this problem lately, the good news for you is that there is an easy fix for this problem. All you need to do is use a new grip on the wheel. If you do not know how to put on a grip, consider visiting a local mechanic.

Alternatively, you can use sandpaper or any other rough paper and wrap it around your wheel. Sandpapers and grips are readily available in the market, and you can also buy them from an online store. This will produce enough friction, and the motor won’t slip down easily.

  1. System Shuts Down

System Shuts Down

Another problem that you may face w hile using the Trimble Ez-steer system is that sometimes, the system gives an error and shuts down automatically. The speed overriding limit error is one of those errors. You may see some other errors as well. In the end, the system always shuts down.

This problem occurs when your device is using an older firmware version. Cell tower interference caused this issue in the past, but it was later fixed in the new firmware patch. So, if you encounter this problem, check the firmware version of your device.

If you happen to be using an older version, you will need to update it to fix this problem. Thankfully, updating the firmware version is a pretty straightforward affair. Just visit Trimble’s official website, and you will find the new version there.

The firmware is compatible with multiple device platforms and is free to install. And yes, make sure that your device has a stable internet connection. The downloading time may vary depending on your internet speed.

  1. Improper Installation

Improper Installation

Improper installation can cause several problems, including wiring problems. So, it is crucial to install the Trimble Ez-steer system the right way. It is a good rule of thumb to reach out to a trained mechanic to get this done.

However, you can also undertake the installation on your own if you have enough knowledge.

The first step is to remove the front wheels and tires. Once you have removed them, remove the hood and take off the screws. Then, unplug all the connections and remove your tractor’s steering wheel.

Start by taking off the centerpiece and then loosening the nut. This way, you will be able to take off the steering wheel easily.

The Trimble Ez-steer system comes with a user manual that has all the information that you need to install it properly. Consider reading it to learn the installation process.

If it all seems too complicated, consider visiting your mechanic. They will install it properly and make sure that you do not face any wiring issues later on.

Final Thoughts

The Trimble Ez-steer system is an assisted steering system that offers a hands-free farming experience for over 1200 vehicles. Although it is extremely accurate, you may face a few problems while using it. The system may show error messages and shut down.

We have discussed several tried and tested tips to get your tractor up and running again. If nothing fixes the problem, consider seeking help from a professional.

Leave a Comment