AeroGarden is a famous brand that is known for its unique home-growing systems. These are devices that are capable of growing plants on their own as long as you keep them powered up.
The main reason why people would require these is if they cannot keep a check over the varieties on their own.
AeroGarden devices work best when placed indoors, while you are trying to grow small herbs, fruits, and vegetables. The device will keep the plants healthy and ensure that you get consistent harvests throughout the season.
The plant should then start to die out which indicates that it should be replaced.
There are tons of models that AeroGarden has come up with which is why people should go through these carefully. This helps them in understanding which lineup to purchase.
With that being said, recently some users have been reporting running into problems with these devices.
The “AeroGarden light is too bright” is one of the most common issues that you might have also come across.
This is why we will be using this article to provide you with a list of troubleshooting steps that can be used to ensure the problem is fixed and does not appear again in the future.
Fixing AeroGarden Light Too Bright:
- Adjusting The Lights On AeroGarden
The great thing about the AeroGarden devices is that they are plug-and-play. This means that you have to plug the device inside your house, and it should then start working without any issues.
While this is technically true, people still have to keep tons of things in check to avoid problems.
This includes filling up the water reservoir on your device as well as keeping it full of plant food.
Aside from this, the spectrum lighting on the device should be set in such a way that the plants stay healthy. The standard light wattage ranges from 20 to 50 watts.
The wattage on your lights usually depends on the model of the AeroGarden device that you are using.
The higher the wattage is, the brighter the lights are going to be. Considering this, if you notice that the lights on your AeroGarden growing system are too bright then this might be from your wattage.
Most models that have higher wattage lights on them also come with the option to lower these down. This is provided for two main reasons which include saving energy costs.
Additionally, you can lower the heat from the lights in case your plants are getting burnt.
Whatever the case might be, you can simply decrease the wattage ratings by accessing the settings on your AeroGarden device.
Once done, you can then browse through the configurations to dim the lights, allowing you to fix the problem.
- Adjusting The Height Of Your Grow Lights
In some cases, the model of AeroGarden that you are using might not support the ability to change or alter wattage settings. Usually, these devices have lower wattage ratings so the lights should not be an issue for people looking at the device.
However, if you are trying to grow plants then some varieties might find 20 watts to be too high for them.
This is why the spectrum lights on the AeroGarden devices also come with the option to adjust their height. These can be changed simply by holding the latch on the bar these lights are installed.
You can start by increasing the height a little and then checking if this is far enough. Adjusting the height of these lights is usually easy but fine-tuning it can take some time.
You have to observe the condition of plants every time you adjust the lights and then find the perfect spot for them.
Once done, the plants should then start growing without any further problems.
- Covering The Lights With Silk Fabric
Sometimes people looking at the AeroGarden growing installed in their home might find the spectrum lights to be too bright.
If this is true, then trying to lower the wattage ratings should be your first option. If you are having trouble trying to find this option, then consult the manual for your model.
If there is no option to lower the wattage ratings, then one of the best solutions that you can go with is covering the lights using some type of fabric.
There are several options that you can select from but there are also tons of things that should be considered.
Most materials that you can install on top of the lights will either decrease the brightness too much or even damage the hood of the lights.
This is why silk fabric is one of the best materials that you can go with as it not only decreases the intense glare but is also quite light.
You can purchase the product from most stores easily but keep in mind that the color black works best. People can also try other shades depending on which one they prefer.
Although, if you notice that the other colors are not working as well then try using double layers of them for better results.
- Installing Form Boards Around The Lights
Finally, some people might complain that using silk fabric also decreases the brightness of the light, hurting their plants as a result.
If this problem is also appearing for you then another solution that you can go with is installing form boards around the lights.
The process is simple but takes a lot more effort when compared to installing silk fabric over the lights.
There are tons of brands that provide tri-fold foam boards which usually come in black or white colors. You can purchase one of these depending on your personal preferences and choice.
Once done, people can then start installing the boards on the side of their lights.
These should be installed in such a way that they do not block the light coming from the AeroGarden device. However, the sides should be blocked off so that the glare does not enter your eyes.
If done properly then your problem should get fixed, and you will not have to deal with the same issue again in the future.