The Case 580N Backhoe is a well-known loader that has been around for some time now. Its demand in the market has been increasing day by day, thanks to its incredible utility and price point.
It has everything that businesses and operators are looking for. Apart from the durability and high performance, it also has the speed and responsiveness that every job site demands.
As far as the price range is concerned, it is higher than the rest of the loaders on the list, but it is worth the features and enhanced power that the Case 580N Backhoe flaunts. People who are not quite well informed about the landscaping equipment can settle for Case 580N as a general-purpose loader.
One cannot operate a machine like this without understanding the warning symbols on the unit. If you want your equipment to function at its best, you must keep track of its warning symbols.
Case 580N Backhoe Warning Symbols
Some of the most common warning symbols of Case 580N Backhoe are described as under:
- Oil Pressure Warning Symbol
As soon as the oil pressure warning symbol is displayed, the engine needs to be stopped immediately. The reason is that the engine is liable to potential damage when the oil pressure is low. The life of a loader engine is directly related to the level of oil pressure.
The oil pressure warning symbol is illuminated whenever the oil pressure is too high or too low. Low oil pressure just takes the time of a few seconds to wreck your engine. Therefore, this warning symbol should be taken seriously. Any neglect on your part can damage your vehicle.
Most of the time, the reason behind this warning symbol is the low oil pressure. The latter is caused by a faulty pickup tube, oil pump, internal oil leak, or a clogged oil filter.
Chances of getting your pickup tube faulty and clogged are more if you haven’t been carrying out the oil maintenance in the unit. A lot of oil sludge and dirt can clog the tube.
That is why the oil pump fails to suck the oil, and low oil pressure is generated. The best solution to this problem is cleaning the oil pan or replacing the oil pump pickup tube altogether with a new one.
An oil filter is an important component of the unit that prevents the entry of debris, carbon deposits, and metal chips into the engine. Users who do the regular maintenance of the engine have got nothing to worry about the clogged oil filter.
But those who neglect the maintenance are more likely to get their oil filters prone to the entry of oil sludge. It leads to a drop in the oil pressure, and the warning symbol illuminates.
Internal leaks are yet another cause behind the oil pressure warning symbol. The worst thing about the internal leaks is that you have to disassemble the engine to see if there are leaks inside the engine or not. However, internal leaks are very rare, and it is better to consider them the last way out.
There is also a chance that none of these factors are the cause, and it’s just a false alarm. The electrical wirings getting loose or a bad oil pressure sensor can also trigger this warning symbol.
Plastic is used for the making of these sensors, which is vulnerable to the crack. The sign of the damage to the sensor is the presence of a lot of engine oil around it. As a result, the sensor is unable to read the oil pressure correctly.
To check the functionality of the sensor, use a multimeter and measure the resistance of the sensor. An important thing to remember is that a particular sensor has a specific resistance value so make sure you know the value for the sensor installed in your loader.
There are a couple of wirings between the oil pressure sensor and the instrument cluster. These wirings can encounter damage as a result of the repeated vibrations in the engine compartment while you are driving the loader.
They can go bad or completely break off. A broken wire fails to send the signal to the instrument cluster, which gives rise to the oil pressure warning symbol.
All you need to do is to look for the corrosion signs in the oil pressure sensor and the wirings. If they are in good condition, then they are not triggering the warning symbol. You need to check other things.
In another scenario, actual low oil pressure can cause the problem. Therefore, you need to manage the oil pressure in the unit. The fix to this problem is simple and easy, so you don’t need to hire a mechanic.
In order to check the oil amount in the system, read the instructions from the owner’s manual. If there is more than recommended oil in the unit, drain out the excess. The reverse is true for the opposite. Add more oil if the level is low.
Case owners should keep a regular check on the oil because driving the loader without a check on the oil pressure can destroy the engine.
- Charging Unit Warning Symbol
The problems concerning your charging unit and voltage of the Case 580N Backhoe Unit are pretty common. The charging unit warning symbol is a sign of the poor charging of your unit. There are also multiple possibilities for issues with the voltage management system in the unit.
In order to resolve the issue, locate the wiring cluster in the unit and inspect it thoroughly. Connection points should also be looked at. They are most likely to get rusted.
You can use a vinegar solution to wipe the corrosion away. If you see any pinched wires in the unit, get rid of them and replace them with new and functional ones.
Usually, the warning symbol of the charging unit has to do a lot with the alternator. Most of the time, the voltage from the alternator is low. You need to get your mechanic to make a replacement for the weak alternator.
Problems with the alternator can also arise from the failed drive belt. It can be damaged. You need to check the condition of the drive belt first and then call in for the mechanic.
In addition, check the power output from the battery as well. A power output above 12 volts is a safe sign, and it doesn’t require battery replacement. However, if the power output of the battery is below 12 volts, there is a high chance that the battery has drained.
You need to get a new battery. After installing the battery, start the unit and see if the charging unit symbol is displayed or not. Most of the time, the warning symbol doesn’t appear anymore. The battery replacement solves the problem.
- Engine Coolant Warning Symbol
The engine coolant warning symbol appears whenever your engine is overheating. Upon the appearance of this symbol, shut down the engine and look into the problem. The fix to this problem depends on how severe the issue is.
The first step is to stop the vehicle because you don’t have to submit your engine to too high a temperature. The damage resulting from the high temperature in the engine can cost you expensive repairs.
Take some time to let the loader cool down. You can then proceed to take further action. In case you try to open the radiator cap while the engine is burning from the high temperature, you are risking the hot steam.
The next thing that you need to do is open the reservoir cap slowly and release the pressure. Now, check the level of the coolant and add more if required.
In case you are sure about the adequacy of the coolant levels, check for leaks in the hoses or the reservoir. Although the leaks are pretty small to be seen with the naked eye, you still need to take a check.
If there is no problem with the coolant or the leaks, get in touch with the professional. Apart from that, you can also contact Case customer support and seek their help on the matter.
Their services are usually reliable, and their guidance through the troubleshooting methods is exemplary. But make sure you have correctly identified the problem first. Only then will you be able to troubleshoot it with help from the support team.