7 Common 2188 Combine Problems (With Their Fixes)

2188 combine problems
2188 combine problems

2188 Combines are used for harvesting purposes. These Combines are powerful and trouble-free. However, you can run into troubles in the 2188 Combine with time.

Therefore, 2188 Combine problems faced by users in this unit are given below, with detailed guidelines to troubleshoot all issues.

Troubleshooting the 2188 Combine Problems

  1. Display Error Problem

Most of the users of 2188 combine faced the display errors problem. The users mentioned that the error lights were displayed even when there was no issue with the tractor. This problem is caused by any malfunction in the ECU of the computer.

Thus, you can fix this problem by attaching an OBD2 scanner to the tractor. Doing this will display an error code on the screen of the scanner.

After receiving the code, match the code with the owner’s-manual, and you will know the reason that is causing these lights to illuminate.

As a result, you will be able to diagnose the problem easily. On the other hand, if you cannot address the problem, then call the experts working at the nearest workstation of John Deere, and they will fix the problem for you.

  1. Engine Misfiring Problem

The users of 2188 combine also complained about the engine misfiring problem. The users ran into this problem soon after purchasing this unit. This problem is often related to the fuel system of the tractor.

Thus, to fix this problem, start the inspection from the fuel pump of the tractor.

After inspection, if you find any blockage in the pump, you can fix it by replacing the pump.Moreover, the engine misfiring problem can also appear if the fuel lines and the tractor filters are clogged.

Dirt in the fuel line

Thus, if these are the reasons causing this problem, clean the carbon inside the fuel lines blocking the fuel supply after inspection.

On the other hand, if the filters are clogged, then buy new filters from the auto zone and replace the clogged ones. By doing this, the engine misfiring problem should fix.

To prevent this issue, regularly clean the fuel system, and replace the filters every 500 hours of using this unit.

  1. Cooling System Failure Problem

The users of 2188 combine also ran into cooling system failure problems. The reason for this problem is that the coolant level in the tractor is low or leaks are present in the cooling system.

Thus, to fix this problem, inspect the coolant level and refill it if needed.

Moreover, use a pressure tester to check the presence of any leakages in the cooling system. If there are any leaks, then replace the leaking parts immediately with new parts from John Deere stores.

Furthermore, regularly check the coolant level to prevent this problem in the future.

In conclusion, some of the common 2188 Combine problems faced by users are display error issues, engine misfiring problems, and cooling system failure problems.

In addition to that, these problems can also be fixed easily with proper inspection and maintenance.

However, if you have difficulty fixing these issues, feel free to call the experts at John Deere workstations. They will address all your problems in this unit and make it as good as new.

  1. Automatic Height Control Problem

The automatic height control problem is one of the most common problems in the 2188 combine. If the potentiometer gets stuck in the feeder house, you will face this problem.

Moreover, you can also face this problem if there is any defect in the tractor’s wiring.

Firstly, inspect the potentiometer; if it is stuck, loosen it up to fix this problem. Furthermore, apply a lubricant so that the potentiometer rotates without any resistance.


After lubricating the potentiometer, if you are still facing this problem, then the problem could be the wiring.

If this is the case, inspect the tractor’s wiring and tighten them up if you find any loose connections. In contrast, you can also face the automatic height control problem if there is dirt in the plugs.

However, you can troubleshoot this problem by cleaning the plugs. Furthermore, you can run into this problem if the potentiometer’s direction is flipped around.

Thus, in this case, adjust the direction of the potentiometer. As a result of doing this, the problem will be fixed. 

To prevent this problem, inspect the potentiometer at regular intervals and clean the plugs so that dirt does not accumulate. You can avoid this problem in your 2188 combine by taking preventive measures.

In conclusion, these are three common problems in 2188 combines, along with their solutions.

However, if you still cannot address the issue, contact the nearest John Deere workstation for expert assistance.

  1. Fix a clogged drain line

One common problem with the 2188 combine is a clogged drain line. This can happen due to the buildup of dirt and debris in the drain line over time.

First, inspect the drain line and clean any visible blockages to fix this issue. Use a pipe cleaner or similar tool to remove stubborn buildup if necessary.

Additionally, regularly inspect and clean the drain line to prevent this issue from happening again. If the clog persists despite cleaning, it may be necessary to replace the drain line entirely.

If you are unsure or unable to fix the problem, contact John Deere for expert assistance.

  1. Increase Fuel Efficiency

Another common issue with the 2188 combine is decreased fuel efficiency. This can happen for various reasons, such as clogged air filters or dirty fuel injectors.

Fuel Efficiency

First, check and clean or replace any dirty or clogged air filters to address this problem. Additionally, inspect and clean the fuel injectors to ensure they are functioning properly.

Furthermore, regularly inspect and maintain these components to ensure optimal fuel efficiency in the future.

If the issue persists despite these efforts, it may be necessary to consult a professional at a John Deere workstation for expert assistance.

  1. Transmission Problem

The users also faced the transmission problem in 2188 combine units. The tractor might not move forward, or it might start to vibrate while moving forward or reverse gear.

This problem is caused by any friction in the gears of the transmission system, resulting in the blockage of smooth movement.

Hence, to fix this problem, start the inspection from the gearbox and check for any blockage or friction in the gears. If there is any blockage, remove it and apply a lubricant on the gears to create smooth movement.

On the other hand, if you find any worn-out gears, replace them with new ones. As a result, this problem will be fixed.

Additionally, some users faced this problem because the transmission fluid was low. Thus, to prevent this issue, always check the transmission fluid level and refill it before any tractor operation.

transmission fluid

You can troubleshoot the transmission problem in 2188 combine units by doing so.

The John Deere 2188 combine has various problems that can occur during operation. However, proper inspection and troubleshooting techniques can easily fix these problems.

It is important to always check for any blockages or defects before operating the tractor to prevent these issues from occurring in the first place.

Always maintain and properly care for your equipment to ensure smooth operation. To prevent this issue in the future, regularly inspect and maintain your 2188 combine unit.

It is also important to consult with a professional mechanic if you are unsure about fixing these problems on your own. Safety should always be a priority when troubleshooting any issues with your equipment.

By following these tips, you can ensure the smooth operation of your John Deere 2188 combine unit.


All in one, these are some of the problems that can show up in your 2188 combine. However, by reading this article, you will be able to address the reasons behind the issues that popped up in your unit.

As a result, troubleshooting those problems will not be a big task.

Moreover, if your tractor runs without trouble, take the tractor for maintenance on time. If you run into a problem that needs a lot of money to be fixed, then claim the warranty of your tractor, and the company will fix it for free.

If the warranty of your tractor has expired, then always keep your tractor insured. The insurance company will pay if any problem pops up in your tractor. Aside from the maintenance, you can also run into issues with time.

Hence, if this is the case, always troubleshoot those problems at the start; else, other serious issues will be generated.

Leave a Comment