3 Steps To Fix John Deere Tachometer Not Working

John Deere Tachometer Not Working
John Deere Tachometer Not Working

Tractors have been used for centuries to mechanize farming tasks. They feature heavy-duty engines and are capable of lifting heavy loads. They can work at slow speeds on rough terrains, making them an ideal farming vehicle.

They are efficient, convenient, and time-saving. In addition, they offer exceptional versatility, and modern tractor models can also be used in construction and landscaping.

John Deere is a well-known agricultural equipment manufacturing company. The company has manufactured some of the finest tractors, implements, harvesters, and other agricultural equipment the industry has ever seen.

They are highly functional and require little maintenance, making them an excellent choice for farmers.

With that being said, many users have complained about the John Deere tachometer not working. A tachometer gauge is a tool used to measure an engine’s working speed in revolutions per minute.

From airplanes to tractors, it is used in a wide range of vehicles. It is much more than just a moving needle; it tells you how hard the engine is running.

Numerous problems have been associated with the tachometers in John Deere tractors. However, all of them could be fixed easily. This article will list three steps to fix the John Deere tachometer. Let’s delve further without any ado!

John Deere Tachometer Not Working

John Deere Tachometer Not Working

Here are some reasons why the tachometer in John Deere tractors may not work sometimes.

  1. Inaccurate Wiring

Inaccurate Wiring

Wrong wiring is among the primary reasons for a failing tachometer. If you are getting inaccurate readings, there is a high likelihood of something wrong with your tachometer’s wiring.

The good news for you is that you can quickly check it. Just take a look at the wires of your John Deere tachometer. You will need to rewire the wires if they are damaged or burnt.

To check your tachometer, start the engine and use a Voltmeter to check the current supply through the wires. If the reading is not optimal, some component has probably worn out, and you will need to replace your tachometer.

Any rating between 1000 to 1500 is okay when the engine is idling. It should be somewhere between 1500 to 2000 at a cruising speed. If it is fluctuating quickly, take it as a red flag.

If you do not have a voltmeter, you can still check your tachometer by following other methods. If you notice that the needle is stuck on a certain number, even when you are running your tractor, it indicates a failing tachometer.

Secondly, if the needle is taking giant leaps and moving abnormally, it also shows a problem in your tachometer.

John Deere tachometers are readily available all over the world. However, if you cannot find it for some reason, you can also go online and purchase it from an online store.

Thankfully, installing a new tachometer is a pretty straightforward affair. However, if you do not have enough knowledge, it would be better to seek professional help. A professional will install the tachometer correctly, and you won’t face any wiring problems later on.

  1. Faulty Fuse

Faulty Fuse

A blown-out fuse is also among the common problems in the John Deere tachometers. It usually happens in rainy conditions when the wires get wet. If your tachometer’s fuse has blown out, it will get stuck to zero and cease to work.

To check if the fuse is blown out, remove the fuse from its holder. The holder usually lies beneath the tachometer. Once you have removed the fuse, closely inspect the fuse wire. If there is a gap in the wire or the fuse is black from the inside, it means that the fuse is blown out and needs to be replaced.

Most tachometers use a 5V fuse. However, that may vary depending on your tractor model. Make sure to refer to the user manual before purchasing a fuse. It will have information regarding the fuse amperage and the fuse’s location.

You can replace the fuse on your own if you are handy. Just go to your nearby hardware store, and you will find it there. Just make sure to buy the right amperage.

  1. LED Screen Have Been Fused

LED Screen Have Been Fused

Fused LED screens are another common problem in the John Deere tachometers. If the LED screen of the digital tachometer is fused, the tachometer will not display any readings, and your tachometer may not respond at all.

If that’s the case, there is nothing much you can do, and removing and replacing it is the only viable option. Consider replacing it instantly to monitor your John Deere tractor’s performance.

When purchasing an LED screen, make sure to conduct some market research and buy the best one that is equipped with the latest features. Don’t buy a cheap model, or else you may need to replace it again after a few months.

And yes, it is a good idea to compare the prices of different tachometers to get the best deal.

For further guidance, it is recommended to refer to the owner manual. John Deere tractors come with a manual that has all the information you need to operate them. Some manuals even have a wiring diagram to assist you with rewiring. And yes, you can also download the manual online.

If you have tried all the troubleshooting steps mentioned above and nothing fixes your tachometer, it is time to contact a trained professional. They are skilled, knowledgeable, and have the right equipment to fix your tachometer.

Hiring a mechanic may seem costly, but you can rest assured that they will do whatever needs to be done to fix the problems.

Final Thoughts

Tachometers are standard equipment used in most tractors. They allow you to monitor your engine’s performance accurately and conveniently. If the reading is fluctuating quickly, it indicates a problem with the tachometer.

If your John Deere tachometer is not working properly, inspect its wiring and look for any damaged wires. The fuse may also blow out sometimes, or there could also be something wrong with the LCD screen. Consider visiting a mechanic to get your tachometer fixed or replaced.

Leave a Comment