10 Solutions For John Deere Flex Draper Problems

john deere flex draper problems
john deere flex draper problems

John Deere manufactures the best quality products for farms and gardening. The Flex Draper is also one of their products, and the users loved it. It is because while using it on long grass, the users were satisfied with it.

However, some users got into trouble using the John Deere Flex draper. Therefore, the John Deere Flex Draper problems and all the possible ways to fix those troubles are given below.

How to Resolve John Deere Flex Draper Problems

  1. Flex Draper Belt Plugging Problem

If the Flex Draper belt gets plugged in, it can be a big problem. To resolve this problem, you must clean the belt and ensure no debris or anything is stuck. After that, you must check the belt’s tension and ensure it is not too loose or tight.

The belt problem in John Deere Flex Draper is one of the most common problems reported by users. The users experienced that the belts of the Flex Draper kept plugging with the beans. This problem is caused due to the unadjusted timing of the belts.

Therefore, you can fix this hectic problem by just tightening the belts. The belt problem in John Deere Flex Draper is one of the most common problems reported by users.

The users experienced that the belts of the Flex Draper kept plugging with the beans.

This problem is caused due to the unadjusted timing of the belts. Therefore, you can fix this hectic problem by just tightening the belts. Moreover, you need to make sure that the belts are debris-free.

  1. John Deere Flex Draper Bearing Problem

Another problem in John Deere Flex Draper is that the bearings keep failing. This problem is quite serious because if the bearings fail, then the whole system will be affected, and it can lead to a big accident.

To fix this problem, consider replacing the bearings with new ones.

  1. John Deere Flex Draper Chain Problem

The chain is an important part of the John Deere Flex Draper, and if it breaks, then it can be a big problem. To fix this problem, get a replacement.

  1. Belt Movement Problem

Belts are used in the Flex Draper because they carry the crops. Hence, if there is any malfunction in the belts then the Flex Draper will not move.

This problem can be a bit hectic for the daily users of this unit. Therefore, fixing this problem is important, and it can be done by inspecting the belts and the blockage between the motor.

Firstly, start the inspection of the belts. It is because if there is any defect in the belts then this problem can pop up.

Hence, if the belts contribute to this problem, then all you need to do is replace the belts from the nearest authorized dealership.

On the other hand, if the belts are not the case and you are still stuck in this problem, you need to check if there is any blockage.

Blockage in filter

As a result of it, the problem will be solved, and your Flex Draper will start working again.

Moreover, the belt movement problem can also be caused if the motor or the pulley is defective.

Therefore, check the motors first, and if there is any malfunction with the motor, then contact the nearest authorized dealership to replace the motor with the new one.

However, replacing the motor will cost a lot. Therefore, claim the warranty of your tractor. By doing this, the company will replace the motor at no cost.

Meanwhile, the belt movement problem can also be caused if the pulley on which the belts rotate is faulty.

Therefore, inspect the pulley, and if there is any defect, replace it from the nearest service station.

  1. Noisy Flex Draper

Aside from the movement problem, the users of John Deere also complained about the noise issue. The users experienced the noise coming from the Flex Draper. This problem is often caused if the belts are worn out.

noisy

Therefore, check the belts and replace them if you find any malfunction. On the other hand, the noise problem can also show up due to the dry belts and the pulley.

Therefore, you can also fix them by applying grease. Moreover, you should also apply grease on all the moving parts of the Draper to extend their life.

  1. Flex Draper Cutting Problem

Most of the users of John Deere Flex Draper have run into the cutting problem and are worried about it. If you are one of the users who also ran into this trouble then to fix it all you have to do is inspect the rotation and the blades or teeth of the Draper.

The rotation of the Draper needs to be inspected because if the rotation is slow, it can contribute to the cutting problem. Therefore, you can fix this problem by checking Draper’s pulley and belts.

After inspecting, if you find any problem, replace them with the nearest customer service station. On the other hand, if the rotation of the Draper is perfectly fine, then all that has to be done is to check the blades of the Draper.

grass field

It is because if the Draper blades are weak, it can cause a cutting problem.

Therefore, if this is the case, then install more knives and replace the blades from the nearest customer service center. By doing this, the problem will be fixed.

  1. Hydraulic Problem

The hydraulics are used in the John Deere Flex Draper to lower and raise the cutting platform. As a result of it, if there is any problem in the hydraulic system, then it will not be able to operate properly.

Therefore, this problem needs to be fixed as soon as possible because if it is not, it can lead to bigger problems.

The first thing that you need to do is check the oil level in the hydraulic system. If the oil level is low, you need to add more oil. If the oil level is fine, you need to check for any leaks in the system.

If there are any leaks, you need to fix them because if the oil leaks, it can lead to a big accident.

Moreover, you need to check the pressure in the system. If the pressure is not correct, then you need to adjust it.

  1. John Deere Flex Draper PTO Problem

PTO is an important part of the John Deere Flex Draper, and if it is not working properly, then it can be a big problem.

PTO Problems

To fix this problem, you need to check the PTO shaft and ensure it is not damaged. If the shaft is damaged, you must replace it with a new one.

Moreover, you need to make sure that the PTO is properly lubricated. If it is not, then you need to lubricate it.

  1. John Deere Flex Draper Wheels Problem

The John Deere Flex Draper wheels are made with high-quality material, but they can sometimes create problems. The most common problem with the wheels is that they keep slipping.

To fix this problem, you need to check the tire pressure and ensure it is according to the manufacturer’s recommendation.

  1. John Deere Flex Draper Header Problem

The most common problem with the header is that it keeps getting stuck. To fix this problem, you need to check the header and ensure it is not damaged. If it is damaged, you need to replace it with a new one.

  1. John Deere Flex Draper Engine Problem

The engine is the most important part of the John Deere Flex Draper, and if it is not working properly, then it can be a big problem.

To fix this problem, you must check the engine oil and ensure it is at the correct level. If the oil level is low, you need to add more oil.

The John Deere Flex Draper is a great product for those who need to move large amounts of hay or other materials from one place to another.

However, some users have reported problems with the draper not properly folding up when they are finished using it.

This can be a major problem if you are trying to store the draper in a small space or if you need to transport it to another location.

Conclusion

The John Deere Flex Draper is a great machine, but it is not without problems. This article has looked at some of the users’ most common issues with their Flex Drapers.

We hope that this article has helped troubleshoot your own machine.

All in all, these are some problems you can run into while using the John Deere Flex Draper. Most of them are related to the belt. Therefore, replacing the belt will fix the problems.

Moreover, if you run into any of these problems, reading this article will help you troubleshoot them easily.

Leave a Comment