How To Change Start Code On A Bobcat? (Explained)

A Bobcat is a small construction vehicle often used on building sites. Many unique features on a Bobcat can help you maximize project productivity. A Bobcat can cost thousands of dollars, but it can save you time and money in the long run.

Purchasing a Bobcat for your business might be a good option if you’re involved in multiple landscaping projects.

With that said, many people have recently been asking how to change the start code on Bobcat. Let’s briefly cover this procedure to help you with the complete instructions.

Why does a Bobcat need a start code?

You must be wondering why a Bobcat needs a code, right? Well, the code is used to start the Bobcat’s engine. If you want to change the start code on your Bobcat, here’s what you need to do.

Begin with first locating the small black box that is located on the Dashboard near the steering wheel.

This black box is where the start code is entered. Next, use a small screwdriver to remove the two screws holding the black box in place. Once the screws are removed, you can open the black box and access the start code.

Please enter the new start code into the black box and close it. Make sure to screw the black box back into place to secure it. That’s it! You have now successfully changed the start code on your Bobcat.

If you’re unfamiliar with what commands to give, continue reading as we explain how to change the start code in detail.

How To Change Start Code On A Bobcat?

1. Modify Configurations

To change the start code on Bobcat, you must first access the main panel through the current pin.

After entering the code, you can modify the start code on your Bobcat. It would help if you pressed the right arrow key twice to change the start code.

This will bring you to the security tab, where you can change the start code.

At this stage, you have to select the current operator and proceed to change the unit password. Select the New Operator After you determine the current operator; a new operator will be chosen.

Here, you can enter the new code that is four digits long. The last step would be to save these changes by selecting the ‘Save’ button at the bottom of this page. You can enter any numeric password and confirm the new password.

This will change the start code on your Bobcat. You won’t have to worry about unauthorized people accessing the Bobcat.

This process is fairly simple, and all you need is to know the current password of the unit. Things can become complicated if you’re not aware of the current password.

2. Use Master Code

If you don’t have the current password of the unit, one of the easiest things you can do is use the master code to modify the existing code.

If, for some reason, you don’t have the master code on your person, you should open the owner’s manual to find out.

Once you’ve found the master code for your unit, try using that code to access the Bobcat. After you’ve entered the master code, you can change the start code on your Bobcat. 

After that, you can follow the procedure mentioned in the previous step to modify the configurations and change the start password.

All in all, things would remain under control if you had free access to the master code or the current owner code.

3. Ask Bobcat Support

Customer support from Bobcat can also help you maneuver this issue if you don’t have access to the master code. If you provide proof of ownership and the model number, they will help you with complete instructions.

With the help of the master code from Bobcat support, you can modify the start code without any issues.

So, if you’re running into issues with changing the code on your Bobcat, ask the professionals at Bobcat to help you. They will immediately connect you with a professional to help isolate the configuration issue.

With that said, note down a copy of your Bobcat master code for further reference. That way, you won’t have to contact customer support again to change the start code on your Bobcat.

4. Reset The System

If you don’t have the master code or the current password, you can try resetting the system as a last resort. This will delete all of the existing codes and passwords on your Bobcat. So, if you have no other option, you should reset the system.

This will give you a clean slate to work with. After that, you can create a new password and start the code for your Bobcat.

Resetting the system is straightforward; you only need a few minutes. But, if you don’t know how to do it, you can check the owner’s manual. The process of resetting varies from one model to another.

5. Hire A Locksmith

If you still can’t figure out how to change the start code on your Bobcat, the only other option you have is to hire a locksmith. Hiring a locksmith should only be considered a last resort because it can get expensive.

But, if you don’t have any other choice, you should look for a reliable locksmith in your area. A professional locksmith will have the tools and experience required to change the start code on your Bobcat.

6. Bring It To The Dealer

The last resort would be to take the Bobcat to an authorized dealer or service center. They will have the required tools and expertise to change the start code on your machine.

But this option can be expensive and time-consuming. If you don’t have any other option, you should bring the Bobcat to the dealer.

To Prevent this issue:

1. Keep a copy of the master code in a safe place.
2. If you buy a used Bobcat, get the previous owner’s current password.
3. Be sure to regularly change the start code on your Bobcat to prevent unauthorized access.
4. If you have any concerns, contact Bobcat customer support.

Can you get Locked out of your Bobcat?

Getting locked out of your Bobcat is possible if you forget the start code or password. You can try using the master code to access the machine if that happens. You can contact Bobcat customer support for assistance if you don’t have the master code.

They will be able to help you change the start code on your Bobcat.

When to reach out for help?

If you can’t figure out how to change the start code on your Bobcat, the only option is to hire a locksmith. Hiring a locksmith should only be considered a last resort because it can get expensive.

But, if you don’t have any other choice, you should look for a reliable locksmith in your area.

A professional locksmith will have the tools and experience required to change the start code on your Bobcat.

To Sum it Up:

When it comes to changing the start code on your Bobcat, there are a few things you need to keep in mind. First of all, if you have the current password of the unit, you can enter a new password and confirm it.

But things can get complicated if you don’t have the current password. In that case, you can use the master code to change the start code on your Bobcat.

If, for some reason, you don’t have the master code on your person, you should open the owner’s manual to find out.

Once you’ve found the master code for your unit, try using that code to access the Bobcat. After you’ve entered the master code, you can change the start code on your Bobcat.

After that, you can follow the procedure mentioned in the previous step to modify the configurations and change the start password.

All in all, things would remain under control if you had free access to the master code or the current owner code.

But if you don’t have access to the master code or the current password, you can try resetting the system as a last resort. This will delete all of the existing codes and passwords on your Bobcat.

So, if you have no other option, you should reset the system. This will give you a clean slate to work with. After that, you can create a new password and start code for your Bobcat.

Resetting the system is straightforward; you only need a few minutes. But, if you don’t know how to do it, you can check the owner’s manual. The process of resetting varies from one model to another.