Miracle-Gro is a leading brand when it comes to fertilizers and similar products. The company has even come up with products that can be used to keep pests away from your garden. However, the most popular item that this brand has come up with is plant food. This comes in two different variations which include the solid plant food as well as the liquid one. The Miracle-Gro Liquafeed comes with a sprayer that is used to pour the product around your soil.
The spray allows people to uniformly spread the chemical without any major issues. Though, you need to keep in mind that there are also some problems that you can run into with the sprayer itself. Recently people have been reporting that the Miracle-Gro Liquafeed sprayer is not dispensing. You might be running into a similar issue, so going through this article should help you out. This is because we will be providing you with some reasons behind the issue as well as ways that can be used to deal with them.
Miracle-Gro Liquafeed Sprayer Not Dispensing
- Check For Clogs In Bottle
The first thing that you should be checking for in your Miracle-Gro Liquafeed sprayer is its bottle. This is because this can form clogs inside it which can prevent people from using the fertilizer. While the problem is quite annoying to deal with, the solution can be quite easy. The only thing that you have to do is check open the sprayer bottle and then check the inlet hole on it.
This is the part where the water enters the sprayer. If you notice that there is something stuck on it then remove this carefully. You can usually remove most of the debris or dirt stuck inside the sprayer bottle with ease. Once this is done, you can then set up the device again and try using it. This time, you will notice that the sprayer bottle works without any further issues.
- Settings On the Control Knob
Aside from the spray bottle itself, another thing that should be checked in cases like these is the control knob on the bottle. This can be easily configured using the different modes provided. If you are having trouble trying to set these up, then one simple solution is consulting the manual that can be found along the product.
This is quite simple, and you can go through it to understand how the Miracle-Gro Liquafeed sprayer works. In most cases, the problem people run into is with the mode they had selected. If you want to spray a bottle to dispense liquid, then the knob should be set to the “Feed” setting. Doing so allows the sprayer to pump out liquid with relative ease.
- Water Flow On Your Sprayer
Sometimes the problem that you are getting can be from the water flow on your sprayer bottle. This can be quite annoying, but you should note that the problem is easily solvable. Make sure that you first confirm if your issue is from the water flow or not. You can check this by observing the bottle while the water is switched on.
If you notice that no bubbles are forming inside the sprayer then this means that the pressure is too low. Try using a tap that has a higher water pressure and then check your bottle again. This time small bubbles should be forming inside it that ensure that the sprayer can work without any further problems. You can now spray the fertilizer in your garden without any worries.
- Faulty Product
In some cases, the problem you are getting can be from your Miracle-Gro Liquafeed sprayer being faulty. This is quite rare but there is still a chance that your device might have gotten damaged. In most cases, people can get a free replacement from Miracle-Gro. Although, you have to first go through their warranty guidelines to confirm if your product falls under them or not.
If not, then your only option is to purchase a new sprayer or get the faulty one repaired. However, if your device falls under the warranty guidelines then you can contact the support team and notify them about your problem. They will then provide you with a solution that can be used. Alternatively, the team might ask you to bring in your faulty sprayer for repairs.