The role of tractors in agriculture is so crucial that one cannot imagine any work done without them. It’s not just the agriculture department that the tractors are limited to. They are also highly functional for construction purposes.
There are different forms of tractors, and their uses are also pretty diverse. Ever since the importance of tractors has been acknowledged, a number of tractor manufacturer companies have been formed, out of which Landini is the one.
The efficiency and high performance of Landini tractors are unmatched. However, it is also known for having a few problems.
Users who use Landini tractors have complained about a bunch of issues caused by these tractors. Let’s look more into these problems and try finding effective solutions for them.
Most Common Landini Tractor Problems
- Oil Leaking Out The Gator
The gator of the Landini tractors does not experience the oil leak frequently, but this issue definitely exists. First of all, check the gator and see if it is damaged or not.
Gator is an important component of the tractor that prevents the flow of oil into the gear levers by acting as a seal on the latter. Therefore, you should inspect the gators manually and see if they need a replacement.
- Diesel Engine Fails To Start
A large number of people prefer to buy Landini tractors, thanks to their wonderful features and high performance. But sometimes, Landini tractors face the recurring problem of the engine failing to start. It is a frustrating problem that requires your attention.
There are many reasons for the engine not starting. There can be a problem with the battery or the spark plug. Get them checked and see if there is any progress. If not, contact a professional and get help.
- Lift Jumping Too Much
The most common issue observed with the Landini tractors is that whenever the driver tries to hold the lift in position, it starts to jump more than usual. As annoying as it is, there are some easy and simple fixes for this problem.
The possible cause behind the too much jumping off the lift is the cab mounts. The loose cab mounts give rise to the pull on the linkage whenever the cab moves. This pull is the very reason for the unusually high jumping off the lift.
Therefore, fix the cab mounts to prevent this issue. Another thing you need to do is adjust the draft back. It is also quite effective in keeping the lift from excessive jumping.
- Landini Tractor Overheating
Users frequently run into the problem of their Landini tractor overheating. It is obvious that the laborious tasks get the most out of the tractor, and it starts to overheat.
However, the primary cause of the Landini overheating is the excessive input of fuel. Therefore, try to minimize the load on your tractor. Just like that, adjust the equipment on the tractor as well. It should never be too much.
The ideal operation of the diesel should be near 86-90%. Overheating can also be caused by any problem with the radiator. That is why inspect the radiator and make sure nothing is blocking it.
- Parts Problem
Landini tractors are known for the hard location of their parts. Users find it really annoying to spend so much time and effort just to locate the parts that they are suspicious about.
Therefore, any mild problem with the individual parts of the Landini tractor can get you in trouble. As far as the service manuals of the Landini tractors are concerned, they are also hard to find.
- Steering Function Issues
The functioning of the steering wheel of the Landini tractors has been problematic to the users on a few occasions. Whenever users have to turn the steering wheel, the latter gets too hard.
This defect finds its cause in the low levels of the hydraulic oil. Other causes include the improper alignment of the front wheels, broken pump of the power steering, and leaks in the hydraulic connections. As soon as you diagnose the cause, replace the parts.
In case the steering doesn’t turn at all, there is a high chance that the hydraulic system contains air. You need to take the air out. Check for the defects in the steering cylinder. If there are any, repair the cylinder.
- Dull Blades
Blades are an important part of a tractor that gets a plethora of tasks done. The dulling of the blade is common with frequent use, but with Landini tractors, blades get dull very fast as they wear down. Therefore, they are not quite capable of performing the tasks.
You need to sharpen these blades so that their proper functioning is ensured. It is usually recommended to seek the help of a professional at the tractor repair shop because taking blades off and cleaning them can be risky. You can hurt yourself in the process.
- Axles Make Much Noise During Operation
The excessive axle noise produced from the Landini tractors is another issue that you should be aware of. Whenever you try to make a turn, the front and rear axles generate a lot of noise.
The natural solution to this problem is to apply some oil and kill the noise. However, that’s not long-lasting. The oil application is a temporary solution that works for a while.
Anyone who has been dealing with tractors for a long will know that the noise from the axles is a sign of a problem with the roller bearing and the gear teeth.
Therefore, get in touch with the technician and make sure your tractor is repaired because if you delay this matter, it can cause more issues for your vehicle.
The grinding of metal against each other gives rise to more and more sound. It keeps getting worse every day if left unnoticed. When you are using the Landini tractor under such conditions, there is a high chance of a crash in the rear axle.
An important thing to remember is that do not try to fix the worn-out axles on your own because this task requires professional help and nothing less.
In addition to these problems, rough shifting issues can also occur when the shift linkage adjustment is not right. Check the oil levels as well. White smoke is caused by the more than recommended oil levels. You need to keep all these things in check.
No forward or reverse.
Hi Greg, saw your post on this site from last year while looking for possible insight into same problem that just occurred with my Landini. My forward/reverse shuttle stopped working and has no resistance when moved forwards or backwards and wondered if your problem was the same and if you got it fixed?
I have a 2007 vision 105 and I go through 2 clutch cables a year keep breaking at the bottom link
have a landini 85 bilizzard that front wheel drive will not work
I have a Atlas 100 and looking it over at the 3 point does not raise or lower . Looking for a parts manual and a outlet to purchase parts . Engine is getting tired looking to rebuild it also and help in sourcing is greatly appreciated