It is pretty easy to apply Danish oil after preparing the surface of the wood. You just need a cloth or paper towel and then pour some Danish oil on the towel. After that, you just have to massage the surface of the wood to apply it.
Primarily, you want the surface to be wet to absorb the oil by the wooden surface. Then you can let it cure for a few minutes and wipe away the excess with a towel. Many people are unsure about how long it takes for Danish oil to cure. Let us briefly go over this topic so that you have a better understanding of oil layering.
How Long Does Danish Oil Take to Cure?
The Danish oil is quite a unique finish and can cure several hours depending on the current temperature. If you’re adding multiple layers, you will need to wait for hours each time you add a new layer of Danish oil.
Usually, it can take anywhere around 5 to 7 hours to get the oil to cure. However, this number may vary depending upon the humidity levels and the temperature of the room. So, if you want the oil to cure quickly, you might need to bring up the temperature while managing the humidity levels.
It is better to leave the oil overnight to cure, even if you give it a few hours extra. That way, you won’t have any problems while adding in the second layer of the finish. A way to minimize the curing time is by removing the excess oil from the wooden surface.
So, after applying the first layer, you need to wait for hours and then use a clean towel to wipe away the surface. Doing this will remove any excess oil from the surface, and it will boost the curing time.
Once you’re sure that the first layer is dried, you can add in the second layer of this finish. Then leave it alone for 8 hours. After that, your piece will be ready, and you shouldn’t have to add any more coats of oil.
If done correctly, you won’t have to add additional layers of oil to your wooden piece. If you’re not sure how to apply Danish oil, you can always hire a professional to do it for you. It will cost a few dollars, but at least your furniture will look perfect after this.
To Conclude
Depending on the environmental conditions, it takes around 5 to 9 hours for the Danish oil to cure. If there is sufficient heat and the humidity levels are low, you won’t have to wait more than a few hours to get the Danish oil to cure. You should always wipe away the excess oil after the first layer has been applied.
However, if the temperature is cold and humidity is high, you will need to leave it overnight to cure perfectly. After the first layer has cured, you can add in the additional layer and then wait overnight again. The furniture will be completely ready after two days if you follow the application procedure perfectly.