Kobalt is a famous brand that has been manufacturing gardening tools and equipment for a long time now. The company has tons of lineups that people can go through, and each is equipped with unique features.
If you are trying to purchase these tools, then you should go through their website.
This should help you go through different lineups to select one that suits your usage. The mower from Kobalt has recently been gaining a lot of popularity.
This is because this powerful tool can easily cut through grass and keep your lawn pruned easily.
The equipment helps in saving time and requires almost no effort to use which is why it is one of th e best tools that can get. Though, people have also been reporting running into problems with this device.
Recently, users reported that the Kobalt mower is not starting.
If you are running into similar issues, then going through this article should help you in getting rid of them. This is because we will be providing you with a list of troubleshooting steps that can be used to ensure these problems are fixed.
Kobalt Mower Not Starting
- Check Your Battery
The Kobalt Mower is an amazing tool that is powered up using batteries. These can last you a long time and usually charge as you use the tool.
Keeping this in mind, people should note that Kobalt uses lithium-ion batteries that are known for their efficient electricity usage.
While these can last you a long time, the batteries can still run out of power. Once this happens, you should charge them again as your mower will not work without them.
The company usually provides people with a charger that can be used for these batteries.
Though, make sure that you first unplug the battery from your mower and then plug it into an outlet. If you leave the battery connected to the mower then charging can be a little trickier as the cord is too short to reach some outlets.
Whatever the case might be, let your batteries completely charge.
Once this is done, you can then plug the battery back inside the lawn mower and then start it. People will notice that the tool now starts without any issues.
- Check The Circuit Breaker On Your Mower
Aside from the battery, another reason why you can run into a problem like this can be due to fluctuations in current.
This is the main reason why people should disconnect their batteries before charging them as the current can sometimes fluctuate, resulting in the board getting damaged.
Luckily, Kobalt has a circuit breaker installed on their lawn mower that will trip in case the current and voltage are not stable. This breaks off the connection, preventing current from flowing through the tool.
As a result, the mower will be unable to start until you take care of the circuit breaker.
This should have a small switch on it that can be enabled to fix the problem. Although sometimes the fuse inside the circuit breaker can also burn. You can check this as the fuse is quite easy to take out.
If you notice that this is burnt, then getting it replaced with a new one is your only option.
The great thing about the fuse is that it is quite cheap to replace. The only thing you need to check over is the voltage ratings on the fuse. These should be the same as the ratings provided on your previous fuse to avoid further problems.
- Looking For Debris and Clogs
Sometimes the Kobalt Lawn mower might not start because there are some clogs inside it. These can either be around the blade of the equipment or in the battery compartment.
These usually gather over time which is why cleaning your tools is essential.
If you are someone who regularly cleans your equipment, then this problem should never happen. In most cases, it is recommended that you prevent this from ever happening as it increases the life of your tools.
Though, if you notice that your lawn mower has already been clogged then clearing it is required.
You can start by powering off the power tool and then checking its blade. Make sure that you remove any debris or dust that is gathered around the blade.
You can then move on to the motor, the wirings, and finally the battery on your lawn mower.
If the debris is stuck in any part, then use warm water to soften it. This should allow people to remove it easily. Once done, you can then let your lawn mower dry and then start using it again.
People will notice that the device now starts up without any further issues.
- Lawn Mower Overheating
If you are someone who has a large lawn, then there is a chance that your tool might stop working while you were mowing. This usually happens because the tool might have started to overheat.
The problem is quite common and mostly happens if you use the tool for a long time.
In some cases, this can also happen if you were trying to use the lawn mower in a warm climate. Keeping this information in mind, people can easily prevent the issue by taking care of these factors.
The only thing that you need to do is keep the temperature of your tool under control.
- Faulty Lawn Mower
Finally, if you are still running into the same issue even after trying the steps mentioned above then your lawn mower might be faulty. This is quite rare but there is still a chance that it might happen.
There are tons of parts on the device which have to be checked one by one for damages.
This can take a lot of time which is why you should contact the support team for Kobalt. They will look into your issue and provide you with a viable solution.
The team should check for damages on their own and then get them fixed for you at a suitable price.