Even if you don’t have to deal with a lot of rain in your region, grading the yard properly will help you extend the life of your property by a substantial margin. So, if your lawn is not graded or graded poorly, it is best to hire a landscaping company to regrade the lawn. However, if you don’t have the budget and the size of your lawn is not that enormous, then the lawn will be the perfect option for you. A few gardeners have lately asked about how to regrade a lawn. If you’re also not familiar with the process, then let’s cover it briefly.
How To Regrade a Lawn the Basic Way
To get started with the regrading process, you will need to remove the topsoil from the lawn. Depending upon the severity of the drainage problem, you can either choose to clear the whole lawn or just remove the topsoil from high areas. Once all the topsoil is removed, you can start with the structuring of the layout. This step is more demanding, and you will probably have to rely on heavy machinery if you have a moderately sized garden. Otherwise, it will take a lot of man-hours to get through the regrading process.
After removing all the topsoil from the area, start by scraping away the dirt according to your grading objective. Make sure not to make the slope too steep as that can cause some issues in the long run. Once the grading parameters are set, you can start with removing all the excess dirt from high areas and put it in the low areas where the height of the lawn is not sufficient. It will take many hours to get through the scraping and re-grading of dirt in your lawn.
When you’re happy with the slope after moving around the dirt, use two inches of topsoil from the reserve. Then, till it into the upper layer of the dirt. This step is very crucial as it can help you avoid many drainage problems in the future. So, rent a tilling machine if you don’t have one and start putting in a thin layer of topsoil. Once the lawn is properly tilled, you can move ahead with putting in the rest of the topsoil.
If the amount of topsoil is not enough, it is best to purchase some from the market and ensure that the tilled area is properly covered. You will need around three additional inches of topsoil once the lawn has been regraded. Hopefully, this will help you avoid drainage issues in the long run.
To Conclude
To regrade a lawn, all you have to do is remove the topsoil from the yard. After that, just fix the dirt beneath. Once the slop is perfect, you can till the topsoil into the upper layer of the dirt. Complete the project by adding in a few additional inches of topsoil to cover the whole lawn.
This method is quite effective when you’re dealing with small gardens. So, if you’re struggling with the size of the garden, it is best to rely on professional help.