2 Most Common Claas Chopper Problems Troubleshooting

Claas manufactures heavy-duty machinery for the agricultural department. The Claas machinery is bought all around the globe and people trust its quality. It is because they provide the consumers with the best deals on the tractors and their parts. Moreover, they have the best product quality and their products are always available. They provide the users with parts availability backups.

On the other hand, the service backup is quite impressive. The management has the best communication skills and they have the most talented experts to fix problems in the tractor. As we know, the Claas is the best option to go for but users claimed some issues they ran into while using the Claas chopper. Therefore, we are here to help you diagnose the Claas chopper problems.

Fixing the Claas Chopper Problems

1. Chopping Problem

The users of Claas-chopper claimed that the speed of the chopper decreases while cutting the longer and thinner portion of grass. Moreover, they also mentioned that the cutting strength of the chopper also decreases while cutting the thinner grass. The reason behind this problem is the blockage that resists the rotation of the blades.

Therefore, to fix this problem all that has to be done is to check for the blockage between the blades and if you successfully find the blockage then immediately remove it. Moreover, this problem is also related to the performance of the engine. Simply, if the engine is not delivering its perfect output then this problem can pop up. Therefore, to fix this problem all that has to be done is to inspect the reasons behind the engine performance and fix the issue that is contributing to this problem.

Moreover, you can also run into this problem due to the following reasons

• Space Between the Blades

Aside from the blockage between the blades, the chopping problem can also pop up if the space between the blades is unequal or not adjusted. Therefore, to fix this problem all that has to be done is to inspect the space between the blades and for adjusting the blades, call the experts working in the nearest authorized dealership of Claas.

• Weak Blades

Weak blades are one of the most common reasons that contribute to this problem. The cutting problem is almost always related to the blades. Therefore, inspect the blades of the chopper and if the blades are weak then replace the blades from the nearest service center. Moreover, you can also install additional knives for better productivity. Another symptom of a weak blade is that the chopper will not cut the grass during the daytime.

• DC Converter

On the other hand, the chopping problem can also pop up if the DC converter is defective. It is because the amount of current the chopper needs to run will not be delivered to the chopper if the DC converter is defective. Therefore, replace the converter from the nearest authorized dealership.

• Dry Parts

Moreover, dry parts can be the reason contributing to the chopping problem. Therefore, this problem can be fixed by lubricating the dry parts of the tractor. Especially apply the lubricant on the linkage of the blades and the stone. Always use WD40 for this purpose.

2. Chopping Assembly

The chopping problem can also be caused if the chopping assembly is defective. Therefore, to fix this replace the whole assembly from the nearest service center. However, replacing the whole assembly will cost a lot. Therefore, claim the warranty of your tractor and the company will replace the assembly for free.

Conclusion

Overall, you can run into the Claas chopper problems due to the following reasons:

1. If the linkage or parts of the chopper are dry,
2. If there is any blockage,
3. If the chopping assembly is defective and needs to be replaced,
4. If the space between the blades is unequal,
5. If the blades are weak,
6. If the DC converter is defective.

Therefore, these are the reasons that can contribute to the chopper problems. Thus, to fix this a complete guideline is given above to help you, and if you are still stuck in the situation and cannot fix the problem then call the experts in the nearest authorized dealership to help you in troubleshooting the problem.