Bobcat is one of the safest options that you can go for if you need a reliable machine for your projects. The skid steers from this brand provide a perfect balance between efficiency and performance. Moreover, Bobcat skid steers are quite durable and you don’t have to worry about these machines breaking down. So, if you are looking for a safe and long-term investment then Bobcat is a viable option. Lately, some users have been struggling with the warning lights on the Bobcat T190 skid steer. If you’re also stuck in a similar situation, the following troubleshooting methods should help.
3 Methods to Clear Bobcat T190 Warning Lights
1. Check System Voltage
If you’re having issues with the warning lights on the Bobcat T190 skid steer then you should start by inspecting the system voltage. You can rely on the use of a multimeter for this purpose. If the voltage output from the system does not match the desired reading, then you will have to fix the power source. This usually involves the installation of a new battery system in your skid steer. So, if the multimeter is not showing you optimal voltage from the system, it might be time to look towards installing a battery replacement.
If the battery is working just fine and there is no voltage deficiency then the issue might be related to faulty wiring and dirty contact points. Start by cleaning the contact points with vinegar solution and check the warning lights again. If the warning lights are not working still, inspect individual wires connected to the instrument panel. Replace any wire that is damaged and that should fix the warning light issue. 2.
2. Check Bulbs & Fuses
If you’re sure that the voltage output is not the problem then you will need to inspect the bulbs as well as fuses. Even if the fuses don’t seem to be blown, you should inspect both ends by using a multimeter. If there is a significant difference in voltage across the ends of a fuse then you will have to replace it immediately.
On the other hand, it is also possible that you’re struggling with faulty bulbs in the instrument cluster. So, make sure to connect individual bulbs with an external source and check if the bulb comes on or not. If you can’t see any response from the bulb then installing a bulb replacement should fix the warning lights problem.
3. Call an Expert
If you’re still unable to get around the warning lights issue with the skid steer then now might be a good time to call an expert. It is possible that you have a faulty or fried instrument cluster. In this scenario, you will have to purchase a replacement and that should help you isolate the problem.
A new instrument panel can cost a few thousand dollars depending upon your model. So, you will have to manage the budget accordingly to fix the warning lights. However, most of the time, this issue is fixable after you manage the system voltage. So, hopefully, you won’t have to spend so much money on the panel replacement.