AeroGarden is a famous brand that is known for its lineups of growing systems. These are devices that come in different shapes and sizes.
Though, the main thing to note is that these allow people to grow plants without any effort. This is because of the tons of features that the equipment comes with.
People can simply install pods inside the growing system after which these will be grown by the device itself. The only thing that you need to do is keep the compartments on this equipment, filled up.
The device will then keep your plants fed and watered on their own.
Some LED spectrum lights replicate sunlight. These can be used to ensure that your plants will get all the nutrients required even if they are not kept near a window.
While the AeroGarden is amazing, there are also some problems that you can run into when using it.
Recently, people have been reporting that the AeroGarden pump is not working. If you are running into the same issue, then going through this article should help you out.
This is because we will be providing you with several reasons behind the problem as well as ways that can be used to fix them.
Fixing AeroGarden Pump Not Working:
- Changing Water Inside Device
When using the AeroGarden growing system, people should note that several things should be kept in check. The device is designed in such a way that you can get frequent harvests from it without many issues.
Though, the herbs being planted are ones that usually last a single season.
When it comes to this, the water inside the device constantly cycles over the plants. This can stay clean for a long time as the only thing getting mixed in it is the plant food.
Though, you should note that the water should still be replaced after some time.
In most cases, it is recommended that you at least change the water after the season changes. Your plants will require replacement as well which is why you should take the time to clean the device as well.
The process should only take you a few minutes but ensures that problems can be prevented.
The pump not working is often a result of not cleaning the water supply which is why this should also allow you to fix the problem you were getting.
- Pump Might Be Clogged
As mentioned above, changing the water inside your AeroGarden is necessary. If you don’t do this, then the water will start catching dust and debris over time.
This starts to enter the internal parts of the device, mainly the pump as it is constantly circulating the supply of water.
While some debris entering the pump is normal, you should note that too much of it will end up causing a clog. If this happens then your AeroGarden will stop working.
Cleaning the water inside your device will help in preventing this problem but if you are already getting the issue then this will not work.
This is why your only option is to remove the pump and then clean it properly. This is quite easy but make sure that you switch off the AeroGarden device beforehand.
Keeping it running can cause the pump or some other part to get damaged.
If you notice that the debris is stuck, then make sure that you pour warm water over it. This helps in softening it out so that you can wipe it off easily.
Once the pump has been cleaned, install it back in and your growing system should now work without any further problems.
- Pump Might Be Damaged
Sometimes people notice that the pump is still not working even after they have cleaned it properly. If this happens then there is a high chance that your pump has already gotten damaged.
This is why you should keep your AeroGarden growing system maintained at all times.
If you simply clean the water inside the device and then wipe off its parts occasionally then problems like these can be prevented.
While the pump getting damaged is quite annoying, people can usually replace this with a new one fairly easily.
The only thing that you have to do is search for a new pump that is compatible with your model of AeroGarden growing system. You can then install this on your own without much effort.
If you are still having trouble, then refer to the manual provided along with the product.
- Voltage Stability Issues
Sometimes the AeroGarden Growing System can stop working due to voltage fluctuations. If this happens then the problem can be quite annoying to deal with.
But you should note that the devices come with a security feature that shuts them down in cases like these.
The main benefit of having the device shut down is that it cannot get damaged from the stability problems in voltage.
Considering this, your AeroGarden should start working on its own after the voltage becomes stable. The only thing you can do is wait during this time.
Sometimes the problem can be from the outlet is faulty. If this is true, then getting your socket replaced is important. You can also check the voltage readings using a multimeter to confirm this.
- AeroGarden Might Be Faulty
Finally, if you have tried the steps mentioned above but your AeroGarden Growing System is still running into problems then there is a high chance that the device might be faulty.
You can try finding the part that might be damaged, but this can take a lot of time and effort.
Additionally, sometimes two parts can be damaged which is why you will have an even harder time finding the issue.
To prevent all this hassle, the best way to fix this problem is by contacting the support team for AeroGarden. Luckily, the brand is quite friendly and reliable to work with.
As long as you provide the team with all the information required regarding the problem. They should be able to help you out in getting rid of it.
In most cases, the AeroGarden device has to be sent to the brand for repairs. Though, this only takes a few days or a week at most.