Microgreen Growth Time Calculator

Microgreen Growth Time Calculator

Estimate tray crop timing from sowing to harvest using crop type, tray size, seed density, germination, blackout, light days, room temperature, media, airflow, light strength, harvest height, rinse method, and weekly production targets.

harvest date seed per tray yield estimate weekly schedule
🌱Microgreen Crop Presets

Choose a common microgreen crop setup, then tune the tray details to match your rack, seed lot, and harvest standard.

Growth Time Inputs
Use packed harvest weight after trim and drying.

Microgreen tray plan

Adjust inputs to calculate harvest timing, seed, yield, and schedule needs.

Days to harvest
--
--
--
Seed needed
--
--
--
Expected yield
--
--
--
Weekly rhythm
--
--
--
Calculation Breakdown
Crop profile--
Tray area--
Seed density and germination--
Base growth time--
Condition adjustment--
Blackout and light split--
Yield range--
Target production--
📊Crop Comparison Grid
Fast brassicas6 to 11 days

Broccoli, cabbage, kale, mustard, and radish finish quickly when kept near 68 to 74 F with steady moisture.

Large shoots9 to 14 days

Pea and sunflower use much more seed per tray and usually need a longer weighted blackout to push even stems.

Delicate colors10 to 18 days

Amaranth, beet, and chard are slower, more sensitive to overwatering, and often harvested shorter for garnish work.

Herb micros14 to 25 days

Basil and cilantro take longer, but higher flavor value can justify a slower tray turn in a small rack plan.

📏Tray Area and Seed Benchmarks
200 in2
10 x 20 tray
The standard benchmark used for most seed density recommendations.
100 in2
10 x 10 tray
Half tray; use about half the seed and half the finished yield.
93 in2
30 x 20 cm
Metric sample tray; multiply by 0.465 of a 10 x 20 tray.
233 in2
30 x 50 cm
Large metric tray; multiply by 1.16 of a 10 x 20 tray.
Common Crop Timing Table
CropTypical blackoutTypical light daysHarvest cue
Broccoli or brassica blend2 to 4 days, often weighted5 to 8 daysOpen cotyledons, 2 to 3 inches tall
Radish or daikon1.5 to 3 days, weighted lightly3 to 5 daysCrisp stems before heat becomes harsh
Pea shoots3 to 5 days, weighted or stacked6 to 9 days4 to 6 inch shoots before tendrils toughen
Sunflower shoots3 to 5 days, weighted5 to 8 daysHulls mostly shed, leaves still tender
Basil3 to 5 days, warm and humid10 to 16 daysSmall true leaves just starting
🌱Seed Density Reference
Crop groupSeed per 10 x 20 trayFinished yield rangeDensity note
Broccoli, kale, cabbage18 to 24 g8 to 12 ozDense enough to canopy, not so dense that stems mat.
Radish and mustard20 to 32 g8 to 14 ozFast crops tolerate higher density with good airflow.
Pea shoots180 to 250 g12 to 20 ozPre-soak and spread in a single crowded layer.
Sunflower90 to 140 g10 to 16 ozHull shedding is easier with even moisture and weight.
Herb microgreens8 to 18 g3 to 8 ozSlow crops use lower density to avoid damping off.
💡Condition Adjustment Table
ConditionFast rangeSlower rangePlanning effect
Room temperature68 to 74 F for most cropsBelow 62 F or above 80 FCold slows germination; heat raises stretch and disease risk.
Light strengthBright shelf LEDs after blackoutWeak window lightWeak light adds time and can make stems leggy.
MediaClean soil or coir with even moistureThin dry mats or saturated traysMoisture swings reduce yield and widen the harvest window.
AirflowGentle fan, leaves dry by nightStill humid shelvesPoor airflow shortens shelf life and can force early harvest.
📅Production Planning Table
Production styleTray rhythmBest cropsUse case
Home salad rack1 to 3 trays weeklyBroccoli, radish, peaSmall fresh harvests with little storage.
Chef garnish batchStagger 2 to 4 trays twice weeklyAmaranth, mustard, basilColor and flavor variety for short orders.
Market rotationSow every 2 to 3 daysBrassicas, radish, sunflowerConsistent cut weight for market days.
Juice productionWheatgrass every 3 to 4 daysWheatgrassHigh biomass trays cut close to service.
Microgreen Growing Tips

Keep the timing flexible. Plan around a harvest window, not one exact hour. Crop variety, seed age, room temperature, and how quickly trays dry after watering can shift harvest by a day or two.

Weigh real harvests. After two or three rounds, replace the default yield numbers with your own tray weights. Your shelves, lights, media, and knife height matter more than any generic benchmark.

Why do most people begin growing microgreens? They crave fresh greens on their countertop.

But then they become confused and ultimatelty frustrated when they approach each seed as if it were a radish. In fact, one (like broccoli) will follow an entirely different biological clock than another (like basil). Broccoli may take only a week to reach harvest, whereas a basil require almost three weeks to form true leaves. Try to treat them similarly with the same instinct, and you’ll either harvest the former too-early, getting nothing, or the latter too-late, until it’s all watery and tasteless.

How to Grow Microgreens Successfully

Once you input your specific environmental conditions and the crop itself into the calculator above, it’ll do the math for you so that you don’t have to guess at coefficients and convert units in your head.

The second variable that tricks novices is the blackout period. This is the dark stage immediately following sowing when we conceal the seed to trigger its upward thrust, or what biologists call “stem elongation.” Sounds counter-intuitive: Why would we want to hide our harvest? Well, the darkness is what forces the stems to push upward and elongate.

The darker the better: Kale and broccoli, which are brassicas, typically require between three and four days; some quickies such as radishes may reach maturity after just two. Sunflowers and peas sometimes benefit from being weighed down for four or five days of darkness so they can thicken stems enough to hold their heads up high once time comes to open. Too little darkness, or skipping it altogether, will result in thick, short stems (with no hope of the canopy opening). Too much darkness causes excessive stretching, which makes the plants floppy. It is a narrow window, but it is the foundation of the whole thing.

Duration isn’t everything; the quality of light matters too. When they finally get to see daylight after being under the blackout cover, the seedlings go from chasing light to trying to catch it. A blast of strong LED light encourages good open cotyledons and sturdy stems. Pale, gangly greens that break off at the slightest touch are grown in weak window light. To reflect this, the tool allows you to set an adjustment for the light’s strength. It also knows that things go faster on a bright production rack than on a dimmed corner shelf.

Temperature also supports this: Generally speaking, most microgreens prefer temperatures between sixty-eight and seventy-four degrees Fahrenheit. If your room is cold, it will prolong the germination time by a day or two. If it’s hot and there’s not great airflow, heat can make things go faster…but increase the danger of mold.

Intuition will also mislead us about how many seeds to sow in each spot. More is better, right? Not necessarily. Too much can result in a dense planting. This makes it likely to catch damping off disease, which is caused by a moist microclimate close to the soil surface.

The information referenced gives guidelines for what to expect when sowing certain amounts of seed by weight in a given amount of space (per tray). It takes into account how well each plant grows and the size of the final canopy. Arugula seeds, for example, are large; because peas must be harvested with their first few leaves and stems, the data calls for far less pea seed by weight in a tray than arugula seed. The calculator factors in your germination rate and your tray sizes to make sure it doesn’t suggest you wind up with a matted mess of stems that won’t be harvestable, or worse yet, half a tray of nothing but bare ground.

Expectations differ widely with each crop, too. You may get just eight ounces of trimmed greens from a typical ten by twenty inch tray of radishes. Perhaps a tray of basil, slower to grow and cut back when it’s time to use the actual leaves? You may get four ounces, but they are more flavorful and worth more in terms of price. Using these weight profiles, the tool helps you decide what to sow and how often to do it, which shows how your weekly harvest will look.

Need sixteen ounces of mixed greens per week? Try sowing two trays of quick-grow brassicas each week; or maybe one tray of slower herbs every other week.

That leaves us with the final piece: the weekly schedule. Growing microgreens isn’t only science, it’s rhythm. When will you sow what? To maintain a consistent supply, you’ll want to know how many trays to sow each week. The calculator tells you how many trays, so that you can keep up steady production. It turns a messy garden into a steady production line. Suddenly, you no longer fret over when to harvest; you trust the process.

And really, that’s where most people stumble. Each crop has its own timer; understand that, and tune in to the environment by matching it to the timer.

Begin by growing just radishes or maybe broccoli. These plants can teach you the rhythm of the system. A forgiving crop like radish (fast) builds confidence. A steady, dense plant like broccoli (reliable), teaches you how to manage a canopy. When you’ve mastered them, branch out: Try some basil, or peas? Timing comes from the data; knowing when something’s ready comes from what you see (eyes, not brain). Watch for bright color and open cotyledons. Believe the numbers, but check yourself. It’s less “forcing” than “negotiating” with nature. You set up the conditions and let the seed do the work. The calendar advises when to say no thanks.

Microgreen Growth Time Calculator

Leave a Comment