6 Common Yamaha Grizzly 700 Problems Troubleshooting

yamaha grizzly 700 problems
yamaha grizzly 700 problems

Finding new accessories and equipment can be annoying when you’re new to farming. However, the worst thing that you can do is to experiment on your own.

Seeking help from local experts and relying on established brands like Yamaha will save you a ton of money in the long run.

Yamaha is one of the oldest companies that manufacture bikes and boats. Their manufacturing quality is really good and people trust this brand all over the world.

Moreover, their build quality is the best and most reliable, and their products are long-lasting.

The Yamaha Grizzly has a strong body and frame which makes it tough for off-roading. Its shape gives an aggressive look, and it has a powerful engine, which makes it perfect for off-roading.

So, if you’re planning on purchasing a four-wheeler for your farm, Yamaha Grizzly should be your top option.

However, people faced some problems with some of the units of the Yamaha Grizzly 700. Therefore, the Yamaha Grizzly 700 problems with the complete solutions guideline are given below.

Resolving Yamaha Grizzly 700 Problems

  1. Instability Problem

The Yamaha Grizzly 700 gives complete comfort and stability on a flat road but has a stability problem when you drive it in hilly or muddy areas. This is due to its compact and lightweight frame, which is designed for off-roading.

Moreover, it has a high seat which makes it unstable.

Therefore, all you need to do is to replace the rims with heavy rims and install some weights on the bike. This will increase its weight and make it somewhat comfortable.

Yes, you will be losing out on some efficiency when adding more white to the unit. 

However, this reduction in efficiency will not be that massive. You will only be losing out on a couple of bucks in the long run. So, there is no need to worry about going out of budget.

With that said, it will still take a lot of trial and error to find the sweet spot.

error

You need to aim for good stability and minimal weight on the Yamaha unit. That way, you will not have to bear the increase in budget that much, and the system will serve you perfectly in the long run. 

  1. Grizzly-Overheating Problem

The Yamaha Grizzly has an overheating problem. It is because of the one-cylinder engine. Many people faced this problem.

Therefore, you do not have to worry, because to resolve this annoying problem you just have to install a radiator and fill it with a good quality coolant.

This will keep the vehicle’s engine at normal temperature and the issue will not appear again.

You can also check up on the load and make sure that there are no issues with the engine itself. Check all the filters, and try to streamline the performance of the unit.

If the issue is persistent under minimal load, then you need to get it checked. 

Overheating

There might be something wrong with the engine itself, and taking the unit to a mechanic or calling in a mechanic will serve you better. Hopefully, you will be able to avoid some hassle with the system overheating under minimal pressure. 

  1. Noisy-Engine Problem

Some of the users of the Yamaha Grizzly 700 faced a noisy engine problem. It is an annoying problem for the users, who drive it on a daily basis.

It is because the users who love to drive this subcompact off-road daily do not enjoy its drive. Therefore, this problem needs to be fixed as soon as possible.

Thus, all you need to do is to install a good-quality muffler on its rear rack. This will reduce the noise of the engine and will make the drive enjoyable for you.

Yes, the muffler will cost you a bit, but you’re not left with many choices here. 

You have to rely on a solid silencer to help you limit the noise. This is especially true if you live in a rough patch where the drive is a bit tough. So, get a suitable muffler and that will have you sorted out in the long run. 

  1. Dirty Filter Problem

Some of the users of this unit have reported that the dirt gets through the filter if you drive the bike in muddy or sandy areas. Therefore, it is important to clean the filter on an early basis.

Clogged Hydraulic Filter

It is because the dirt can block the filter and damage the internal parts of the engine. 

As a result of that, petrol consumption will increase and the performance of the bike will not be the same anymore. It all comes down to how you’re planning on addressing and fixing the situation. So, be sure to rely on the filter replacement. 

Moreover, it can also destroy the engine cranks. For this reason, remove the filter and apply some grease around the corners, which will stop the dust from getting through the filter.

Furthermore, if you drive the bike in muddy areas very often, then check the filter daily and clean it if necessary.

Sometimes, cleaning out the filters is more than enough to sort out these errors.

However, that is not always the case. There are a few exceptions where the situation with the filter is too rough, and you will have to spend money on a replacement. So, be sure to get the filters replaced. 

  1. Smoke Problem

The Yamaha Grizzly 700 has a smoke problem. Bike smoking at the startup is unhealthy and dangerous for the environment.

White Smoke

Therefore, this problem can be resolved by taking the bike to the nearest customer’s maintenance center, or cleaning the valves of the engine and adjusting them according to the specified requirement.

  1. Engine-Starting Problem

Engine starting problem is really common amongst Yamaha Grizzly 700. Thus, this problem needs a solution that requires knowing the reasons behind it.

Therefore, to find the reason, you need to go through the following steps to troubleshoot this issue as soon as possible.

  • Check The Engine Valves

To troubleshoot this problem first check the engine valves, if they seem too tight adjust them. This will resolve the problem. You can also hire an expert to help you here, and it won’t cost you that much to get ahead of these complications. 

  • Check The Wiring

A Wiring Problem

Look out for loose or damaged wires, and if you find any, replace them with new ones. This includes loose connections as well as frayed sections and damaged wiring.

So, be sure to reach out and rely on a professional as you’re trying to sort out these issues.

  • Weak Battery

Check the battery, and if the battery health is too low replace it with the new one. It is because the battery provides the engine with the necessary power it needs to start.

Therefore, if the battery is low and is not providing the power needed then the engine will not start.

So, you will have to spend the money to get a replacement. This is especially true if you’ve been using this Yamaha system for a few years now. Luckily, the battery replacement is fairly cheap.

You will not have to go out of budget to include this option in your setup. 

Replacing the battery

Ninety percent of the time, it all comes down to how you’re planning on addressing the situation. Keeping track of the basic maintenance of the engine as well as the hardware will help you avoid these errors.

There is not a single bike on the market that can work well when you keep ignoring maintenance. So, if you do get stuck in some issues with the system not working or responding to any input, try going through a quick servicing cycle.

You won’t believe how far a bit of cleaning will take you. So, there is no harm in starting the fix by checking up on the hardware, and that will make your life much easier. Hopefully, you will be sorted out in no time. 

Conclusion

As we know, buying a vehicle is easy but keeping it hassle-free is something most people fail to do. Therefore, it is necessary to take your vehicles for tuning and change all oil filters on time to maintain engine health.

There is not a single option on the market that will serve you well when you keep ignoring the basic maintenance requirements. So, try and educate yourself on the basic care requirements.

Yes, it will take a bit of your time, but you’re not left with many options. 

With that out of the way, you should also know that the Yamaha support team is always ready and willing to help you out. You can reach out to the official team for help, and they will be pretty responsive and available to help guide you through minor errors.

Minor challenges and issues can present themselves from time to time. However, that doesn’t mean that you have to fix all of these issues yourself. Just be sure to rely on the officials, and they will make your job much easier. 

Leave a Comment