Construction work used to be hectic back in the day. Today, the market has a number of machines that make construction-related work far more convenient. A skid steer is one of those machines.
If you are a construction worker, you must have used a skid steer. Also known as a skid loader, a skid steer is loved for its versatility and ease of use. In a skid steer, one side of the wheel turns faster than the other, and this is where a skid steer gets its name from.
John Deere is a household name in the agricultural and construction industry. The company was founded in 1837 and earned a sound market reputation. It designs and manufactures heavy-duty equipment related to construction and agriculture.
The stand-out feature of the John Deere skid steers is that they can have many attachments to perform a variety of functions. This is made possible with the help of the quick attach feature. With this feature, you can attach a wide range of attachments, such as a bucket, to handle different tasks.
However, many users have recently reported that the quick attach feature on the John Deere skid steers is not working. When this function stops working, you won’t be able to use any attachments.
So, why does the quick attach feature suddenly stop working? And more importantly, how to fix it? Today, we intend to share a few reasons and solutions for the quick attach feature not working on the John Deere skid steers. Let’s dig deeper!
John Deere Skid Steer Quick Attach Not Working
Quick attach feature on John Deere skid steers not working? Here are a few solutions to try!
- Test the Fuse
Start by checking the fuse of your skid steer, as it is the culprit more often than not. Fuse is an important component of any skid steer. It is designed in a way that it blows out in case excessive current flows through the circuit, thus protecting your skid steer and its other components.
So, if the quick attach feature on your John Deere skid steer is not working, consider taking a look at its fuse first.
You can detect a blown-out fuse by visually inspecting it. If the wire inside the fuse is broken, it indicates that the fuse has blown out and needs to be replaced.
However, a fuse is a tiny structure, and it could be hard for you to inspect it if you are doing it for the first time. This is why it is recommended to use a multimeter for this purpose.
A multimeter is an instrument that is used to measure the electric current and voltage of a component or wires. To test a multimeter, you will need to take it out of your John Deere skid steer.
The location of the fuse varies depending on your model. Rather than guessing its location, it would be better to consult the user manual to locate it. The John Deere skid steer comes with a user manual that has all the information about its components and working.
So, it can help you locate the fuse. Furthermore, it will also have guidelines for the correct installation of the fuse.
If you have misplaced the operator manual, it can also be downloaded online. Once you have downloaded it, go to the fuse section and read it to locate the fuse.
The fuses are usually kept inside a fuse panel of a skid steer. Once you have accessed the panel, test the fuse with a multimeter. The multimeter has two leads, which you will have to attach to each side of the fuse.
Most digital multimeters have a beep mode that gives a beep to tell you whether the fuse is faulty or not. So, do not forget to set the multimeter to beep mode first.
If the fuse has gone bad, the multimeter will not give any sound. So, you will need to replace the fuse to fix the quick attach feature not working in the John Deere skid steer.
Fuses are available at all superstores. However, one thing to keep in mind is that they have different amperage ratings. So, make sure to check the rating of the blown-out fuse before purchasing its replacement.
Once you have purchased a fuse, install it, and the quick attach on the John Deere skid steer will start working again. Installing a fuse is a simple procedure and will only take 10-15 minutes.
- Testing the Wires
If the problem is not with the fuse, proceed to check the wires of your John Deere skid steer. From switches to the solenoid, there are many components that could have gone bad. So, consider examining all these components to find out the culprit.
First, inspect all the wires of your John Deere skid steer visually. Sometimes, the damage could be obvious. So, look for any visible signs of damage. If there is any damaged or burnt wire, replacing it will likely resolve the issue.
However, if all wires look in good health, consider testing them with a multimeter.
The solenoid is a small component usually located inside the starter motor of a skid steer. However, its location may be different in different models. It is crucial for the proper functioning of your John Deere skid steer as it completes the electric connection between the battery and starter motor.
If there is something wrong with the solenoid, your John Deere skid steer may not even start at all.
A multimeter can be used to test a solenoid as well. However, the process is a bit different as you will have to choose the “Ohm” mode on the multimeter. If it is faulty, replace it with a new solenoid. However, if it is in good working condition, proceed to check the switches of your skid steer.
- Getting Help
If you are not handy, it is recommended to seek professional help. As mentioned earlier, the John Deere skid steer is a complicated piece of equipment, and undertaking any repair without proper knowledge can result in additional damage to the equipment.
The troubleshooting process requires checking many components. So, it would be better to hire a trained professional and let them deal with it.
- Contacting Support
John Deere has an active customer care service to help its users in case they run into a problem. The aforementioned workarounds have worked for many users. So, consider trying them first. However, if the problem persists, contacting customer care service will be your best bet.
- Joystick
A joystick is an input device that has the quick attach and various other controls. Of course, if there is some problem with the joystick or quick attach switch, you won’t be able to use the quick attach feature on the John Deere skid steer.
If the controls look in good condition, the problem could be with the joystick of your John Deere skid steer. So, reach out to a professional and ask them to repair it.
The Bottom Line
John Deere skid steers have earned a great name in the industry, thanks to their versatility and durability. Their ability to use attachments makes them suitable for performing different tasks.
However, the quick attach feature may not work sometimes due to a number of reasons. We have mentioned some common reasons for this problem along with its viable fixes.
The Heater fan, wipers, lights, and front bucket release does not work.
in our 320 D skid Steer.