The Cutter Backyard Bug Control Spray is a famous product that the brand has come up with. This can be used on your lawn or backyard to keep bugs away from it.
You should note that these can usually start to gather depending on the weather and the number of plants in your house.
Pests and insects gathering on your lawn can be quite annoying to deal with which is why Cutter Backyard Bug Control Spray can be one of the best products that you can use. This has a simple application that takes only a few minutes.
If done properly, then the bugs in your backyard should all die, fixing the infestation. Now that you understand this, another thing to note is that some users also run into problems with the product.
When it comes to this, people have been reporting that the Cutter Backyard Bug Control is not dispensing.
The problem can be quite frustrating which is why we will be using this article to provide you with a list of steps that can be used to fix it. Going through them should help you in ensuring that issues like these can also be prevented in the future.
Cutter Backyard Bug Control Not Dispensing
- Checking The Bottle Cap
After purchasing the Cutter Backyard Bug Control Spray, people should note that the bottle cap on this product is sealed. The cap is unique as the container is also a spray bottle instead of just being a standard container.
The company has its two valves sealed at first so that there is no leakage.
Considering this, people should always store the container carefully after opening the seal as there is a high chance of the chemicals leaking. These can also be toxic sometimes which is why you should keep this in mind.
With that being said, the seals can easily be removed by opening the caps.
You will notice that the top layer of the bottle hole has a lid keeping it sealed. This can be removed by pulling it in most cases. Though, if you are having trouble trying to remove it then using a sharp knife should help.
Once this is taken off, the spray should disperse without any further issues.
- Bottle Might Have Clogs
Sometimes people using the Cutter Backyard Bug Control Spray report that the bottle stopped working or dispersing suddenly. These problems are mostly caused when there are some clogs in your lid.
When using the spray, debris from the water and solution can collect inside the valves.
This will continue to block the passage over time until the connection is completely blocked. As a result, the bottle is unable to disperse liquid until you deal with the clogs. Luckily, this is quite common and releasing the clog takes a few minutes at most.
The only thing that you have to do is remove the cap from your bottle and then check its valves. You will notice that one of these will be blocked with debris.
You can usually remove this by gently rubbing it however if this does not work then use warm water first to soften the layers.
- Solution Might Be Freezing
Another reason why people can run into a problem like this can be due to the weather conditions in their area.
When talking about this, you should note that the solution inside Cutter Backyard Bug Control Spray has to be stored at optimal temperatures.
If you live in an area that is too cold, then the chemicals inside the bottle will start getting thick. These can even become solid in some cases which prevents people from using the product.
Similarly, if the temperature in your area is too hot then the liquid can start to get thinner.
Chemicals that are too thin will not be as effective and might even go bad. This is why you must keep your container stored in an area where the temperatures are around the recommended levels.
This is quite simple, and it should only take you a few minutes.
People who are having trouble with the solution freezing should note that this can easily be fixed if they simply keep their bottle in a warm room for 20 to 30 minutes.
- Not Enough Pressure Building Up
The Cutter Backyard Bug Control Spray bottle has a unique design that allows people to spray the product without having to mix the solution with water.
The only thing that you need to do is connect your water pipeline to the bottle and you can then start spraying the solution.
This is quite simple but sometimes people report that the chemicals are not dispersing. If this is happening, then there is a high chance that your water pressure might be too low.
This can prevent the bottle from throwing out chemicals as these don’t get mixed with the liquid.
When it comes to this issue, people should understand that adequate water pressure is required for the container to function. You can try connecting an air pressure pump to the pipe, but this can be a lot of hassle.
This is why you should get a motor installed in case you have pressure issues.
- Faulty Bottle
Finally, if you have gone through the steps mentioned above but you are still running into the same issue then there is a high chance that your bottle might be broken.
There is a small lever on top of the container that has to be held so that the chemicals can come out.
Sometimes this mechanism can fail to work while there is also a chance that the valves might be faulty. Whatever the case might be, the only solution that you can go with is contacting the support team for Cutter.
The team should look into your issue and provide you with a solution that can be used.
This might take some time, but the support team will ensure that your problem is fixed. People can mostly get a free replacement for the bottle within a few days after which the chemicals can be used freely.