One of the most popular lawn mower brands across the world is known as Craftsman. This company offers a wide variety of top-quality lawn mowers that are just perfect for your garden. So, if you were planning on buying a mowing machine, Craftsman should be your first option.
Some of the craftsman 625 series lawn mower users have recently asked us for tips on managing the oil requirements and how to change them. If you were wondering about the same thing, then let us help you with the procedure.
Craftsman 625 Series Lawn Mower Oil
If you’ve had the mower for a long time, then changing the oil after every 40 hours of use should suit you perfectly. Luckily, the procedure is quite simple, and you can get it done within an hour. All you need is a socket wrench extension and a container to catch the oil. Aside from this, there is no complication to the process, and you’ll be done in no time. So, if you’ve used the mower for over 40 hours, then try following the steps mentioned below.
You need to flip the mower to access the bottom of the machine. Now, you’ll be able to access the bolt on the bottom of the lawnmower. Use the socket wrench extension to loosen the bolt and put the container beneath the lawnmower. The oil will start coming immediately if there is not enough air pressure inside the chamber. However, if the oil is not flowing out of the hole, you should loosen the inlet on top of the mower.
Now, you just have to wait a few minutes for all the oil to flow out of the machine. Once you’ve made sure that all the oil is out, you can remove the empty container and put the bolt back in its place. After that, put new oil into the lawnmower and use the measuring stick to check the oil level. It will take a few tries but make sure not to overfill the mower. Once the oil is full, put the lid back on top of the mower, and you’re all done.
There is not much else to do, and you’ll be done within 15 or 30 minutes if you’re experienced. Changing oil every 40 hours of operation will not only give you more efficiency, but you’ll be able to extend the life of your machine substantially.
To Conclude
Changing the oil in a lawnmower is quite simple. You just have to flip it over and drain the old oil by removing the bolt at the bottom. Make sure to put a container beneath the mower beforehand to avoid creating a mess. Once all the oil is drained, put the bolt back in its place and use the top inlet to add more oil.
Try using the measuring stick to fill up the oil chamber inside the lawnmower. Make sure not to go overboard and close the lid once your mower is filled with new oil. Now, you can get back to work without worrying about changing oil for the next 40 hours of operation.