Bobcat V158 Versahandler is a phenomenal unit that brings over 18 feet of lifting height to your setup. It is one of the most reliable machines that you can purchase for your landscaping projects. You can also purchase this unit with a climate control feature if you’re not too concerned about the budget. So, if you’re looking for a versatile unit to help with the local projects, then going with Bobcat V518 Versahandler is a good option for your setup.
With that said, there are a few issues that users have pointed out over the years. So, let’s cover a few Bobcat V518 Versahandler problems and how you can get around them to maximize the efficiency of your projects.
Bobcat V518 Versahandler Problems
1. Overheating Issues
The most common problem that you will notice users complain about will relate to the cooling system in this unit. While Bobcat has ensured customers with optimal efficiency from the cooling unit, it can run into some problems when you don’t change the coolant at specified intervals. So, if you’re in a similar situation and have not changed the coolant in a while, then that is likely why you’re running into this problem with bobcat V518 overheating.
The best thing you can do here is to check the coolant levels in the system and make sure that they are within the optimal range. If the coolant levels are low, then you can just top up the system, and it should fix overheating problems. However, if the coolant levels were perfect, then it might be time to replace the coolant in your system.
In some situations, you might also have to service the cooling system. So, if there is a lot of rust and debris on the cooling components, then use any cleaner from the market to remove all the excess rust from the system. Hopefully, this issue will be fixed at this point, and you won’t have to worry about the unit again.
2. Low Hydraulic Power
Even though the Versahandler is a powerful loader, there have been a fair number of reports where users complained about low hydraulic power from the unit. Some users mentioned that this unit struggled to handle the load that was well within the lighting capacity. So, if you’re in a similar situation, then there is a good chance that you’re dealing with hydraulic oil problems.
All you need to do to get ahead of this problem is fill up the reservoir, and that should eliminate the power issues. As long as the system is running low on oil, you won’t be able to fix the problem with low power from Versahandler. So, you have to make sure that the oil level is optimal at all times to transfer energy through the system.
With that said, leaking problems and broken seals can also lead towards a similar outcome. So, if you’ve recently filled the reservoir, then it is a good idea to check for broken seals and valves. After isolating the problem, you will have to replace these values, and the issue will be eliminated.
3. Fuel Problems
Aside from the hydraulic power, some users have also mentioned problems with the engine stalling at random intervals. This issue with the engine shutting down is almost always related to the fuel supply from the pump. So, you’ll have to isolate the issue to the clogged filters or broken valves in your fuel system. Ideally, the issue should be fixed once you replace the fuel filters. However, if you’re still stuck in the same issue, then it might be a good time to inspect the fuel valves.
There is a good chance that the fuel valves are either clogged up or leaking. So, you’re unable to ensure the fuel supply to the engine. Luckily, this issue is not that severe, and if you quickly replace the valves, then there would be nothing to worry about over the long run.
All in all, these were a few problems that you can expect to run into with the Bobcat V518 Versahandler. Most of these problems can be avoided by following a consistent monthly maintenance cycle. So, try to set some time aside to clean the unit and service different components. That way, you’ll be able to get better productivity from the unit.