Facing Bobcat ACS Lift Tilt Problem? Check For These 4 Causes Now!

bobcat acs lift tilt problem
bobcat acs lift tilt problem

What is Bobcat ACS?

What is Bobcat ACS

The Bobcat Advanced Control System (ACS) is a first-in-the-industry technology for choosing hydraulic lift and tilt operations in skid-steer and compact-track loaders.

By pressing a toggle switch on the loader’s dashboard, technicians of the Bobcat ACS can quickly switch between hands and feet control. For Bobcat G-Series loader versions 753 and above, ACS is built in.

The hand controls, footswitches, dashboard panel switch, and lift-arm float adjustment button—positioned on the left controlling handle towards the operator—are all included in this factory-installed ACS option.

ACS has given Bobcat loader operators three factory choices for hydraulic raise and tilt operations:

  1. Only use ACS, advanced hand controls, or footswitches.
  2. The lock button on the left handlebar of machines fitted with upgraded hand controls or the ACS enables the lift arm float feature.

More loader operators can fit in ACS thanks to its design!

What Controls Come Standard On Bobcats?

What Controls Come Standard On Bobcats

Foot Control with Two Levers. This particular style of skid steer control system was created by Bobcat 50 years ago and comprised of two steering levers for driving and two-foot pedals for tilting and lifting the loader.

They are still a common approach in today’s market and are commonly referred to as “standard” controls.

Lift and Tilt ACS

The lift and tilt control strength can be changed using lift and tilt compensation. This gives the operator the option of increasing or decreasing the amount of control movement before the start of lift up, lift downward, tilt back, and tilt out processes. The operator can customize each set.

Compensation for Lift and Tilt

  1. Turn the seat bar down before starting the machine.
  2. At the exact moment, hold down the float and push to operate the loader buttons.
  3. LTC will be visible on the left display
  • ACS (H-Pattern)
  1. To control the lift, move the left joystick left and right “LD- Lift Down, LU- Lift Up.”
  2. Adjust tilt by swiping the right joystick left and right “TB- Tilt Back, TO- Tilt Out.”
  3. A toggle switch can be used to adjust the sensitivity.
  • ACS (Hand and Foot)
  1. To control the lift, move the left foot lever forward and backward “LD- Lift Down, LU- Lift Up.”
  2. To control tilt, move the right foot lever forward as well as backward “TB- Tilt Back, TO- Tilt Out.”
  3. A toggle switch can be used to adjust the sensitivity.

Saving The Configurations

After configuring your machine to the desired levels, hit the press to operate button to save your Lift and Tilt Adjustment settings.

At this point, the device will be ready for use. Your settings won’t be saved if you raise the seat bar before hitting the button to work.

Bobcat: The Name of Perfection

Bobcat The Name of Perfection

Farmers all around the country have benefited from Bobcat’s years of research and technology. All of the models this brand offers are renowned for their dependability and cutting-edge features.

So, if you’re unclear about which model to buy for your landscaping tasks, consulting with the dealership’s professionals will help you make a wiser decision. Simply provide them with a thorough description of the working environment, and they will provide you with a few trustworthy solutions.

Common Bobcat ACS Tilt Lift Issues and Its Fixes

However, the Bobcat ACS Lift Tilt Problem has been the subject of numerous reports. The following list will help you in troubleshooting the issues if you’re having trouble with a circumstance that is comparable to it.

  1. Actuator Issue

Actuator Issue

An actuator is a component of a machine or equipment that aids in generating mechanical energy by energy conversion, frequently electric, air, or hydraulic energy. In a nutshell, it is the part of any machine that makes movement possible.

Users who experience ACS lift tilt issues often note that the actuator was the primary source of the problem . To check whether it is functioning perfectly, you must begin the inspection with this component.

However, you may always try your luck at pinpointing the issue yourself. Please contact a professional to lend a hand with the troubleshooting process.

The one and only thing you can do is replace the existing actuator and install a new one on your Bobcat if you’re sure that the current one is acting strangely. Even while the actuator can sometimes be fixed or repaired, you will probably experience the same problem again.

To create a long-term solution, installing a new actuator and giving the machine another try is preferable. At this time, the problem should be resolved.

Similarly, get in touch with your dealer if a warranty backs the item. That way, you will not have to deal with the troubleshooting processes yourself, and the experts will guide you in resolving the problem without imposing unnecessary charges.

  1. How to Proceed If the Actuator Calibration Fails

You must look into why it failed if it does. There could be debris in the spool, a defective actuator, piston, end cap, an issue in the harness, or even a faulty controller.

The possibility of reversing the actuator connectors is one common problem we observe; following a replacement, this is frequently disregarded and is the root of the issue.

  1. Electrical Issues

Electrical Issues

In some cases, electrical issues with your device could also be the reason for your ACS lift tilt difficulties. Therefore, if the actuator is not at fault, you will have to examine the wiring cluster as well as the connecting points to repair it.

Although this procedure may seem complicated, you can always use the wiring diagrams included in the owner’s manual to pinpoint the problem.

Always remove any corrosion from connecting points and properly fasten the wires to the unit as your initial step. To remove the rust from the connection points, you can utilize any cleaning agent available in the marketplace, but be sure to remove the leftover substance with a dry cloth effectively.

It would be best if you replaced any damaged cables in your unit after cleaning the connection points because they could cause problems with the Bobcat unit.

The issue will hopefully be resolved once you replace the connection cables and take care of the rusted points. However, you can always contact Bobcat customer service if the problem persists.

  1. A Dead Battery

A Dead Battery

The ACS lift tilt may have issues if your unit’s battery develops a problem. Therefore, you must examine the battery’s power output with a multimeter.

Your battery may not produce as much power as it should, which is why your device may not function properly. Here, your only option is to buy a fresh battery for your Bobcat. When the new battery is installed, the problem will be resolved.

Additionally, some users have mentioned that reversing the battery connections can help prevent this lift tilt issue. Therefore, you can give it a shot with this strategy to hope your lift tilt will function properly before spending money on a replacement.

These were the main problems with the Bobcat ACS lift tilt you should expect. With any hope, reconnecting the battery connections may enable you to avoid the problem altogether.

You must purchase a replacement if you are confident that the actuator is to blame for the problem. After installing a new actuator, the same issue may not arise again.


Bobcat compact excavators give you two lift-path options, so you may get the most spread at truck bed height or more range at full lift height.

The tilt lift features and systems found on “Bobcat skid-steer loaders and compact track loaders” are unique. Reviewing the issues and their remedies will help you avoid having to visit the shop, allowing you to spend more time working on your project and less time thinking about what you would do if your equipment broke down.

Find out how “skid-steer loaders and compact track loaders” can help you and your jobsite by speaking with your local Bobcat dealer.

Leave a Comment